Eurasian Chemico-Technological Journal, 2000, т. 2, № 2, с. 175-180
Fabrication of Optical Modulator Based on Proton Exchange
Аннотация · Abstract
For the investigation of optical modulator, the optical wave-guide was fabricated on x-cut LiNbO3 substrate using proton exchange method with self-aligned electrode. The electrode pattern was designed using a self-aligned thin film electrode method. After proton exchange process, the wave-guide could be prepared by annealing process to control the width and depth of the optical wave-guide. The initial crossover state of the fabricated 1Вґ2 optical switch was observed with controlling the annealing process variables and the structure of self-aligned thin film electrodes. As the results in the present work, the measured cross talk and minimum detectable switching voltage were obtained at the values of -29.5dB and 8.0V, respectively, with good merits.
Сведения · Details
- DOI 10.18321/ectj376
- Журнал · Journal Eurasian Chemico-Technological Journal
- Язык · Language английский
- Цитирования (Crossref) · Citations 0