Eurasian Chemico-Technological Journal, 2025, т. 27, № 2, с. 149-158
Technological Features of Producing High-Index Oils in the Alkylation Process
Аннотация · Abstract
This article presents the results of studies on key technological parameters-namely temperature and the use of modified ZSM-5 catalysts with Zr and Fe-in the alkylation process aimed at producing high-viscosity-index oils. The development of novel modified catalyst compositions exhibiting high activity in alkylation, to enhance oil viscosity indices to meet global standards, holds significant scientific and practical importance. Modified catalysts based on ZSM-5 zeolite incorporating ZrO2 and Fe2O3 (ZSM-5-ZrO2 and ZSM-5-Fe2O3), along with their regenerated forms after use in alkylation, were evaluated in both autoclave and pilot-scale alkylation processes. Catalyst characterization was performed using X-ray phase analysis, thermogravimetric analysis (TG), and dynamic light scattering (DLS). Alkylation of the low-viscosity-index fraction of turbine oil T-30 (initial viscosity index of 49.9) was conducted at 50 °C using catalytic cracking gases containing 56.35% olefins. The ZSM-5-ZrO2 catalyst produced alkylates with viscosity indices of 137.0 and 121.8 in the autoclave and pilot plant, respectively. The regenerated ZSM-5-ZrO2 catalyst yielded viscosity indices of 117.8 (autoclave) and 111.7 (pilot plant). Alkylates obtained with ZSM-5-Fe2O3 and its regenerated counterpart showed viscosity indices of 99.3 and 94.7, respectively. The feasibility of reusing spent and regenerated catalysts in the alkylation process was confirmed. Among the catalysts tested, ZSM-5-ZrO2 demonstrated the highest activity and is recommended for alkylating low-viscosity-index oil fractions with catalytic cracking gases at 50 °C.
Сведения · Details
- DOI 10.18321/ectj1662
- Журнал · Journal Eurasian Chemico-Technological Journal
- Язык · Language английский
- Цитирования (Crossref) · Citations 0
- Лицензия · License creativecommons.org/licenses/by/4.0