Central Asian Research Index

Eurasian Chemico-Technological Journal, 2025, т. 27, № 1, с. 35-44

Two-Stage Conversion of Carbon Dioxide to Methanol on Co-Pd-Containing Catalysts Based on Aluminosilicates at Atmospheric Pressure

Sh.F. Tagiyeva, S.N. Osmanova, A.I. Rustamova, F.K. Pashayeva, R.M. Muradkhanov, A.N. Mammadov, E.H. Ismailov

Аннотация · Abstract

A two-stage process for CO2 conversion into methanol under continuous flow and atmospheric pressure conditions is proposed, using a bimetallic cobalt–palladium catalyst supported on a Siral-type aluminosilicate (Co-Pd/Siral). In the first stage, CO2 is hydrogenated to methane at 473–523 K according to the reaction: CO2 + 4H2 → CH4 + 2H2O, carried out in the first reactor. After removing the water formed, the second stage involves the conversion of methane, unreacted CO2, and H2 into methanol in a second reactor at 573 K. The introduction of 0.5 wt.% palladium into the 10 wt.% Co/Siral catalyst was shown to promote methanol formation, with a maximum yield of 3.3% observed at 573 K. It is suggested that the catalytically active sites for CO2 hydrogenation to methane are nanosized Co, CoOx particles, while methanol is formed through the oxidation of methane over nanosized PdO particles, following the reaction: PdO + CH4 → Pd + CH3OH. Methane is oxidized by PdO, and the Pd–PdO redox cycle is sustained by carbon dioxide through the reaction: Pd + CO2 → PdO + CO. In addition, cobalt oxides (CoOx) contribute to CO2 activation, significantly facilitating the catalytic cycle.

Сведения · Details