Central Asian Research Index

Chemical Bulletin of Kazakh National University, 2024, т. 112, № 3, с. 12-21

Study of the structural and phase state of ceramics synthesized from 6YSZ - Al2O3 – HfO2 by semi–dry pressing followed by sintering in vacuum

Madi Abilev, Dias Yerbolat, Mazhyn Skakov, Almira Zhilkashinova, Alexandr Pavlov, Nurgamit Kantay, Sergey Gert, Assel Zhilkashinova, Leszek Łatka

S. Amanzholov East Kazakhstan University, Ust-Kamenogorsk, Kazakhstan; al-Farabi Kazakh National University, Almaty, Kazakhstan
S. Amanzholov East Kazakhstan University, Ust-Kamenogorsk, Kazakhstan
S. Amanzholov East Kazakhstan University, Ust-Kamenogorsk, Kazakhstan; KAZ CERAMICS" LLP, Ust-Kamenogorsk, Kazakhstan
Center of Excellence VERITAS, D. Serikbaev East Kazakhstan Technical University, Ust-Kamenogorsk, Kazakhstan
Wroclaw University of Science and Technology, Wroclaw, Poland

Аннотация · Abstract

The study investigates the properties of 6YSZ – Al2O3 – HfO2 powder mixture and the resulting ceramics obtained by semi-dry pressing followed by sintering in vacuum. X-ray fluorescence spectrometry revealed the primary constituents as zirconium (81%), aluminum (8.7%), yttrium (5.7%), and hafnium (3.5%). The average particle diameter was 0.5 μm, with specific surface area and bulk weight recorded at 18,535 cm2/g and 0.84 g/cm3, respectively. X-ray phase analysis indicated a predominance of monoclinic zirconium dioxide. Sintering at 1400-1600°C transformed the phase composition, enhancing density and microhardness, with values peaking at 5.8 g/cm3 and 12.1 GPa at 1600°C. This process also increased the tetragonal phase content to 63%. The ceramics exhibited the highest crack resistance at 1600°C, attributed to the stabilized tetragonal zirconium dioxide. Microstructural analysis confirmed the homogenous distribution of the elements and the presence of fine fractions influencing microstructural properties. 1600°C was found to be the optimal temperature for sintering the 6YSZ – Al2O3 – HfO2 ceramics.

Сведения · Details